Turso Status: How to Check If Turso Is Down (2026)
Updated June 2026 · 5 min read · By API Status Check
Quick Answer: Check Turso Status Now
Turso is an edge-native database built on libSQL (a fork of SQLite) that replicates data to locations close to your users across 35+ global edge regions. It's designed for low-latency reads in serverless and edge runtimes — Vercel Edge Functions, Cloudflare Workers, Deno Deploy, and Bun. When Turso goes down, apps that depend on it for database reads and writes fail, and edge-based apps lose their low-latency advantage. This guide explains how to check Turso's status and distinguish a platform outage from a configuration issue with your database connection.
Understanding Turso's Status Page (status.turso.tech)
Turso operates status.turso.tech — its official status page. Turso's edge architecture means a platform incident may affect database connectivity across all edge locations, or only at specific locations, depending on the nature of the issue. Because Turso replicates data to edge nodes, a primary database failure may still allow reads from replicas.
Turso Platform
Core database read/write operations — libSQL connections to your Turso databases across edge locations. Platform incidents directly affect app database queries. This is the most critical component: if the platform is degraded, all database operations may be slow or failing.
Turso API
The management API used by the Turso CLI (`turso`), the Turso dashboard, and programmatic database provisioning (create database, create token, list databases). API incidents block provisioning operations but typically don't affect existing database connections.
Turso Dashboard
app.turso.tech — the web console for managing databases, viewing schemas, running queries, and managing tokens. Dashboard incidents prevent browser-based management but don't affect database connectivity from your application.
Edge Replicas
Turso's edge replication distributes database replicas to locations worldwide. Replica incidents may cause stale reads or fail-back to the primary database for reads, increasing latency. Writes always go to the primary — replica issues typically don't affect write availability.
What Turso Status Colors Mean
⚠️ Turso Platform Issue vs. Connection Issue — Know the Difference
Many "Turso is down" reports turn out to be connection configuration issues, not platform outages. Before assuming a platform problem:
- Verify your database URL format:
libsql://<db-name>.turso.io - Check that your auth token hasn't expired or been revoked
- Run
turso db shell <db-name>to test connection directly - Verify your database exists:
turso db list - Check the Turso Discord #help channel for similar reports
Monitor your Turso database with independent uptime monitoring
Turso's status page shows platform health — not your specific database's connection health. Better Stack monitors your actual database-dependent app endpoints and alerts you when they go down. Free plan available.
Try Better Stack Free →5 Ways to Check If Turso Is Down
status.turso.tech (Official)
Turso's official status page, showing real-time status for the Turso Platform, API, and dashboard. The most reliable source for platform-wide incidents. Subscribe to email notifications to receive updates automatically.
Check status.turso.tech →turso db shell (CLI)
Run `turso db shell <db-name>` to open an interactive SQLite shell connected to your Turso database. If the shell connects and a test query (`.tables`) succeeds, the platform is up for your database. If it fails to connect, compare with the status page to determine if it's a platform issue or a connection configuration problem.
Turso CLI docs →Turso Discord
Turso's Discord community is very active and is often where outage reports surface first. Search the #help or #announcements channels for current issues. The Turso team regularly responds to incident reports in Discord before the official status page is updated.
Join Turso Discord →@tursodatabase on X
Turso's official X account posts incident updates, maintenance announcements, and platform status from @tursodatabase. The team is active and responsive during outages.
Follow @tursodatabase →X / Twitter (Search)
Search 'turso down' or 'turso database outage' on X. Developers using Turso in SvelteKit, Remix, SolidStart, and other edge-first frameworks report issues quickly on X.
Search X for 'turso down' →Common Turso Issues and What They Mean
"Failed to connect to database: unauthorized"Your Turso auth token is invalid, expired, or has insufficient permissions. Generate a new token with `turso db tokens create <db-name>`. Database-scoped tokens can only access the specified database; group tokens can access all databases in a group."Failed to resolve database URL"The database URL is malformed or the database doesn't exist. Verify the URL format: `libsql://<db-name>-<org>.turso.io`. Check `turso db show <db-name>` for the correct URL. Note: database names are globally unique within your organization slug."Connection timed out"The libSQL connection to the Turso edge node is timing out. This can indicate a platform issue, a network problem between your app and the nearest Turso edge, or a very cold start in a serverless environment. Check status.turso.tech and the Turso Discord for reports of similar issues."SQLITE_BUSY / database is locked"A SQLite write lock is being held. Turso uses SQLite's WAL mode, which allows concurrent reads but serializes writes. Long-running write transactions or a crashed client holding a lock can cause SQLITE_BUSY errors. Use short transactions and ensure connections are properly closed/released."Embedded replica: sync failed"Your embedded replica (libSQL local database) couldn't sync with the primary Turso database. This typically means the primary is unreachable — check connectivity and status.turso.tech. During the sync failure, the embedded replica will continue to serve reads from the local SQLite file (which may be stale)."Too many connections / rate limited"Turso rate limits connections per database on lower tier plans. In serverless environments that create a new connection per invocation, you can quickly hit connection limits. Use connection pooling at the application layer, reuse the libSQL client across requests, or upgrade to a plan with higher connection limits.Turso Outage History: What the Data Shows
Turso is a relatively young platform (founded 2022, generally available since 2023) that runs libSQL databases on distributed edge infrastructure. Its edge-first architecture means incidents are often isolated to specific edge locations rather than global. However, because the primary database and replication coordination are centralized, platform-level incidents can affect connectivity across all locations. Turso's team is active on Discord and X during incidents and typically provides timely updates. The embedded replica feature (local SQLite sync) is the best resilience strategy for apps that need to continue reading data during outages.
What to Do When Turso Is Down
If App Can't Connect to Turso
- Test with
turso db shell <db-name> - Verify auth token is valid and not expired
- Check database URL format in your config
- Check status.turso.tech for platform incidents
- Search Turso Discord for active reports
For Better Outage Resilience
- Implement embedded replicas for local read fallback
- Use optimistic UI patterns for write operations
- Add retry logic with exponential backoff
- Cache frequently-read data at the CDN/edge level
- Set up independent endpoint monitoring
Frequently Asked Questions
Where is the official Turso status page?
Turso's official status page is at status.turso.tech. It shows real-time status for the Turso Platform (database operations), the Turso API, and the Turso dashboard. Subscribe to email notifications to receive alerts when incidents are posted and resolved.
My Turso database connection is failing but the status page is green — what should I check?
When the status page shows operational but your connection fails, the issue is typically in your connection configuration: an expired auth token, an incorrect database URL format, or a database that was deleted. Run `turso db show <db-name>` to verify the database exists and get the correct URL. Generate a new auth token with `turso db tokens create <db-name>`. If both look correct, check the Turso Discord for reports of connection issues in your region.
What are Turso embedded replicas and how do they help during outages?
Turso embedded replicas let your app maintain a local SQLite copy of the database on the application server, synced periodically with the primary Turso database. During a Turso platform outage, your app can continue serving read queries from the local replica (which may be slightly stale). Write operations will fail until connectivity is restored. Enable embedded replicas using the `@libsql/client` SDK with a local file path alongside the remote URL.
Does Turso work with Vercel Edge Functions and Cloudflare Workers?
Yes — Turso's libSQL client supports edge runtimes including Vercel Edge Functions, Cloudflare Workers, and Deno Deploy. Use the HTTP-based libSQL client (`@libsql/client`) in edge environments. Note that embedded replicas are not available in stateless edge functions (they require persistent local storage). For edge functions, standard remote connections are used.
How do I monitor my Turso-powered app uptime independently?
Add a health check endpoint to your application that runs a simple Turso query (e.g., `SELECT 1`) and returns HTTP 200 if successful. Monitor that endpoint with Better Stack or API Status Check Alert Pro for external uptime monitoring. This catches Turso connection issues that aren't reflected in the platform status page, including auth token expiration and network routing problems.
Alert Pro
14-day free trialStop checking — get alerted instantly
Next time Turso goes down, you'll know in under 60 seconds — not when your users start complaining.
- Email alerts for Turso + 9 more APIs
- $0 due today for trial
- Cancel anytime — $9/mo after trial